Performance 6 Cylinder (OM606 & OM603) Mechanical Injection Pump (Dieselmeken) - Kalamassery

Six cylinder mechanical injection pumps built with bigger elements for OM603 and OM606 super-turbo builds.



Choose from the following:

6 mm elements for mild builds with internal ALDA (up to 300 hp)

7.5 mm Dieselmeken elements with external ALDA (street/daily/off road)

8.0 mm Dieselmeken elements with external ALDA (race/drift)



Your pump will be built in house. First it's disassembled and cleaned ultrasonically. Then reassembled with bigger performance elements. Next, it is mounted on our test bench where it is phased and calibrated. We then test run every pump on an engine before shipping to be sure everything is right. We sometimes can ship within a few days, but it can be a couple weeks depending on our queue.



We include the pump to block gasket. A lift pump will not be included, as you probably already have one on your original pump. If you need one, you can buy one HERE.



You are not required to send us a core pump, as this is an outright sale. But if possible, once you receive your built pump, please send us a core using the provided shipping label, and same packaging. Once we receive your core(s), you'll be refunded the following:
350 for OM603 and 1995 OM606
250 for OM602
300 for OM617 M
100 for OM606 and OM605 EDC
100 for OM617 MW



At checkout, simply note how many CC's of fuel you want your pump set to. Here is a rough guide for the OM606:

HP CC

300 100-120cc350 120-140cc400 140-160cc450 160-170cc500 170-190cc550 190-200cc600 200cc



If your engine had an EDC pump originally, you'll need a smaller return banjo bolt.